Contents · 14 min read
- Start from customers, not from a percentage
- What the published figures say
- The calculation from the number of customers you want
- The budget follows the season
- Splitting between channels
- When to increase, when to cut
- Starting without history
- The budget and cash flow
- Three examples
- Traps to avoid
- Key points
- Contents
Start from customers, not from a percentage
The question «what budget should I spend on finding customers?» is often answered with a percentage: so many per cent of revenue. It is convenient, but it takes the problem the wrong way round. A percentage does not tell you how many customers you will get, nor whether you will have the capacity to serve them. It takes no account of your trade, your season or what a customer really costs you.
The method in this article starts from the other end. How many signed customers do you need each month to fill your schedule? How much does a customer cost you, given the price of a contact and your signing rate? The budget follows, and the percentage of revenue becomes a check: it tells you whether the budget is sustainable given your prices.
The calculator below does this calculation with your own figures. Before using it, it is worth seeing what the published figures on marketing budgets say, and why they do not apply as they stand to a tradesperson.
What the published figures say
The most widely quoted figure on the subject comes from the annual survey of marketing directors by the firm Gartner. In its 2025 edition, published in May 2025, marketing budgets represented 7.7 % of the revenue of the companies surveyed, the same as the previous year. Source: Gartner, CMO Spend Survey 2025
| Source | Who was surveyed | Published figure | What it includes |
|---|---|---|---|
| Gartner, CMO Spend Survey 2025 | Marketing directors of large companies | 7.7 % of revenue, unchanged from 2024 | The whole marketing budget: paid media, teams, agencies, tools |
To our knowledge, there is no public Swiss statistic on the share of revenue tradespeople spend on finding customers, nor any figure by trade. No percentage by trade is therefore given here.
Source: Gartner, press release of 12 May 2025, 12.05.2025
This figure has three limits for a tradesperson. It concerns large companies, with marketing departments, brands to maintain and national campaigns. It includes the salaries of marketing teams and agencies, which a tradesperson does not have. And it is an average across all sectors, whereas the useful share varies enormously with the value of a job: spending 7.7 % of the price of a roof is nothing like spending 7.7 % of the price of a chimney sweep.
It is therefore more honest not to give a percentage by trade, for lack of a source, and instead to give you the means to calculate your own. That is what follows.
The calculation from the number of customers you want
The calculation has three steps. They only need four figures, which you know or can estimate with a month of tracking.
- How many signed customers do you want a month? Start from your capacity: the number of jobs you can do, minus those that already come from word of mouth and regular customers.
- How many contacts does it take for one customer? It is the inverse of your signing rate: at 25 %, it takes four contacts for one customer.
- How much does a contact cost? The price of a request received, the cost per contact of your campaigns, or the share of a subscription divided by the number of calls.
Monthly budget = customers wanted ÷ signing rate × cost of a contact. The check comes next: divide this budget by the revenue these customers represent. If the result is higher than the margin you make on a job, the budget is not sustainable, and it is the signing rate or the cost of a contact that needs work, not the budget.
The calculator does not take into account time spent on call-backs, visits and quotes. For trades where every quote needs a visit, this time can weigh more than the budget itself. The article on the acquisition cost of a job explains how to add it.
The budget follows the season
In many trades, demand is not the same all year round. Gardeners, pool builders and landscapers concentrate their requests in spring; chimney sweeps and heating engineers in autumn; removal companies around the usual lease change dates; emergency trades see peaks with every cold snap or storm. A budget spread evenly over twelve months overpays the quiet months and lacks resources when people are searching.
The chart below compares two annual splits of the same budget: one for a seasonal trade and one for a steady trade. The percentages are assumptions, to be replaced with the split of your own requests over the past year.
One caution: increasing the budget in high season only makes sense if you can serve the extra customers. A schedule that is full six weeks ahead gains nothing from receiving more requests; it gains from choosing better which ones to accept. It is often the moment to cut spending on the most expensive channels and keep the most profitable ones.
Splitting between channels
A budget concentrated on a single channel is fragile: a rule change, rising bids or a quiet season are enough to dry it up. A budget spread over six channels is impossible to steer: none has enough volume to be measured. Between the two, a simple split works for most trade businesses.
| Role | What goes into it | How to judge it |
|---|---|---|
| The main channel | The one whose cost per signed customer has been known and acceptable for at least a quarter | Every month, on cost per signed customer and volume |
| The trial channel | A single new channel at a time, with a budget and a duration fixed in advance | At the end of the trial, on cost per signed customer compared with the main channel |
| Free or fixed channels | Google profile, recommendations, website, regular customers | On the number of customers they bring, noted like the others |
There is no universal percentage between these three roles. A prudent rule is never to put more into a trial than you would accept to lose if the trial produced nothing.
A trial deserves a written rule before it starts: a budget, a duration, and the cost per signed customer above which you stop. Without that rule, you extend a disappointing trial «to see for one more month», or stop too early a channel that would have paid off the following season. For a seasonal trade, the trial must cover the high season, otherwise it measures nothing.
When to increase, when to cut
Increase a channel's budget when…
- its cost per signed customer has been stable for at least two months and is below what you are prepared to pay;
- your schedule has room in the coming six weeks;
- the volume of this channel levels off because the budget runs out before the end of the month, not because demand is lacking.
Reduce or cut when…
- the cost per signed customer stays above your threshold, after trying to adjust the channel;
- your schedule is full and demand exceeds what you can serve;
- the contacts received no longer match your trade or your area, a sign that the settings need reviewing before any further spending.
The threshold in question is set once, then reviewed once a year: it is the maximum cost per signed customer you accept, calculated from the margin on an average job. Without this written threshold, every decision becomes a matter of impression.
Starting without history
A business that is starting out, or has never noted where its customers come from, has neither a signing rate nor a cost per contact. Yet it has to set a first budget. The solution is to treat the first quarter as a measurement rather than a plan: a modest budget, a single paid channel, and rigorous tracking of every contact.
- Choose a channel suited to your trade: one where people search actively if your trade deals with emergencies, a visual channel if your job is decided on images.
- Set a budget you can lose without putting the business in difficulty, and a duration of at least three months, or one season for a seasonal trade.
- Note every contact: date, source, reached or not, visit, quote, signature.
- At the end of the quarter, work out your signing rate and your cost per signed customer. These are your first real figures.
- Redo the budget calculation with these figures, and only then decide whether to increase, keep or change channel.
During this first quarter, the most useful free channel is set up in parallel: the Google Business Profile. It costs nothing, takes several weeks to produce, and then supports all the other channels, because many people check a company's profile before calling it back.
The budget and cash flow
An acquisition budget is judged not only on its amount, but also on when the money leaves the till. Between paying for a contact and collecting the customer's invoice, weeks can pass, even months for a project. For a small business, this gap weighs as much as the amount.
| Payment method | When the money goes out | What to plan for |
|---|---|---|
| Annual or six-monthly subscription | In advance, for the whole period | A large outlay all at once, unrelated to the number of customers |
| Pay-per-click advertising, paid afterwards | After the clicks, according to the platform's thresholds and due dates | An invoice that follows activity, sometimes higher than expected if the budget is not capped |
| Prepaid advertising or contacts | When you top up | A balance to watch so that receipt is not interrupted at the wrong moment |
| Payment per delivered contact | With each contact received, on a balance or an invoice | Spending proportional to the volume received |
The exact terms depend on each provider and can be read in its payment terms.
With us, the model is prepaid: a starting credit of CHF 1'000 is paid into your balance and goes entirely towards paying for your requests; each delivered request is debited from this balance, and you top up from your client area. The advantage is predictability: you only spend what you have topped up. The other side is watching the balance: if it is no longer enough, requests are still delivered and the balance becomes negative; without a top-up within 10 days of the reminder, delivery is suspended until you top up.
Three examples
Traps to avoid
- Setting a percentage of revenue without knowing how many customers it will produce.
- Splitting the budget into twelve equal parts in a seasonal trade.
- Testing several new channels at the same time, without being able to say which one worked.
- Increasing the budget when the schedule is already full.
- Comparing the cost of a recurring customer with their first invoice.
- Forgetting the time spent on quotes, which can exceed the budget itself.
Frequently asked questions on this topic
What percentage of revenue should I spend on finding customers?
No public percentage applies to Swiss tradespeople by trade. The most quoted figure, 7.7 % of revenue in 2025 according to Gartner, concerns large companies. Instead, calculate your budget from the customers you want, then check that the share of revenue stays below your margin.
How do I work out my monthly budget?
Divide the number of signed customers you want by your signing rate, then multiply by the cost of a contact. Example: four customers wanted, a 25 % signing rate, a contact at a known price: sixteen contacts to pay for.
What if I don't know my signing rate?
Note every contact and what becomes of it for a month. In the meantime, use a cautious assumption and recalculate as soon as you have your first figures.
Should I spend the same amount all year?
No, unless your demand is steady. In a seasonal trade, split the budget like your requests from the previous year, and only increase it in high season if your schedule can absorb the extra customers.
How many channels should I use at the same time?
One main channel with a known cost, a single trial channel at a time with a fixed budget and duration, and free channels such as the Google profile. Beyond that, it becomes hard to measure what works.
When should a channel be cut?
When its cost per signed customer stays above the threshold you set from your margin, after trying to adjust it, or when your schedule is full.
